dmesg - Intel Core i7 7700K
Linux version 4.12.0-999-generic (kernel@gomeisa) (gcc version 6.3.0 20170519 (Ubuntu/Linaro 6.3.0-18ubuntu2) ) #201706182201 SMP Mon Jun 19 02:02:30 UTC 2017
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000084393fff] usable
BIOS-e820: [mem 0x0000000084394000-0x0000000084394fff] ACPI NVS
BIOS-e820: [mem 0x0000000084395000-0x0000000084395fff] reserved
BIOS-e820: [mem 0x0000000084396000-0x000000008ec4ffff] usable
BIOS-e820: [mem 0x000000008ec50000-0x000000008f0ecfff] reserved
BIOS-e820: [mem 0x000000008f0ed000-0x000000008f193fff] usable
BIOS-e820: [mem 0x000000008f194000-0x000000008f540fff] ACPI NVS
BIOS-e820: [mem 0x000000008f541000-0x000000008fb42fff] reserved
BIOS-e820: [mem 0x000000008fb43000-0x000000008fbfefff] type 20
BIOS-e820: [mem 0x000000008fbff000-0x000000008fbfffff] usable
BIOS-e820: [mem 0x000000008fc00000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000046effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0x8f194000 ACPI=0x8f194000 SMBIOS=0x8fa65000 MPS=0xfca00 ESRT=0x89650c18 MEMATTR=0x897dc018
SMBIOS 3.0 present.
DMI: MSI MS-7A71/Z270-A PRO (MS-7A71), BIOS 1.20 04/07/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x46f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x8fc00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcca0-0x000fccaf] mapped at [ffff9f2fc00fcca0]
esrt: Reserving ESRT space from 0x0000000089650c18 to 0x0000000089650c50.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9f2fc0095000] 95000 size 24576
Using GB pages for direct mapping
BRK [0x15fd14000, 0x15fd14fff] PGTABLE
BRK [0x15fd15000, 0x15fd15fff] PGTABLE
BRK [0x15fd16000, 0x15fd16fff] PGTABLE
BRK [0x15fd17000, 0x15fd17fff] PGTABLE
BRK [0x15fd18000, 0x15fd18fff] PGTABLE
BRK [0x15fd19000, 0x15fd19fff] PGTABLE
BRK [0x15fd1a000, 0x15fd1afff] PGTABLE
BRK [0x15fd1b000, 0x15fd1bfff] PGTABLE
BRK [0x15fd1c000, 0x15fd1cfff] PGTABLE
BRK [0x15fd1d000, 0x15fd1dfff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x32ef9000-0x35773fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000008F194000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000008F1940A8 0000D4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000008F1BD1C0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000008F194218 028FA4 (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x000000008F540D80 000040
ACPI: APIC 0x000000008F1BD2D8 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000008F1BD398 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000008F1BD3E0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000008F1BD480 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000008F1BD4C0 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: SSDT 0x000000008F1BD868 003176 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x000000008F1C09E0 0025A5 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x000000008F1C2F88 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000008F1C2FC0 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x000000008F1C3DA8 000A2C (v02 INTEL xh_rvp08 00000000 INTL 20160422)
ACPI: UEFI 0x000000008F1C47D8 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: SSDT 0x000000008F1C4820 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x000000008F1C5700 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000008F1C5798 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422)
ACPI: SSDT 0x000000008F1C58E0 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000008F1C5B80 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: SSDT 0x000000008F1C8B88 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
ACPI: DBGP 0x000000008F1C90A0 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000008F1C90D8 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: BGRT 0x000000008F1C9130 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: WSMT 0x000000008F1C9168 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000046effffff]
NODE_DATA(0) allocated [mem 0x46efd5000-0x46effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000046effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x0000000084393fff]
node 0: [mem 0x0000000084396000-0x000000008ec4ffff]
node 0: [mem 0x000000008f0ed000-0x000000008f193fff]
node 0: [mem 0x000000008fbff000-0x000000008fbfffff]
node 0: [mem 0x0000000100000000-0x000000046effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000046effffff]
On node 0 totalpages: 4185235
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 9076 pages used for memmap
DMA32 zone: 580854 pages, LIFO batch:31
Normal zone: 56256 pages used for memmap
Normal zone: 3600384 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0x84394000-0x84394fff]
PM: Registered nosave memory: [mem 0x84395000-0x84395fff]
PM: Registered nosave memory: [mem 0x8ec50000-0x8f0ecfff]
PM: Registered nosave memory: [mem 0x8f194000-0x8f540fff]
PM: Registered nosave memory: [mem 0x8f541000-0x8fb42fff]
PM: Registered nosave memory: [mem 0x8fb43000-0x8fbfefff]
PM: Registered nosave memory: [mem 0x8fc00000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 39 pages/cpu @ffff9f342ec00000 s118936 r8192 d32616 u262144
pcpu-alloc: s118936 r8192 d32616 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4119812
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16247944K/16740940K available (9111K kernel code, 2480K rwdata, 3976K rodata, 2260K init, 2392K bss, 492996K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 36998 entries in 145 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:524544 nr_irqs:2048 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 4200.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8400.00 BogoMIPS (lpj=16800000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170303
ACPI: 11 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K
smpboot: Max logical packages: 2
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz (family: 0x6, model: 0x9e, stepping: 0x9)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (67207.65 BogoMIPS)
sched_clock: Marking stable (636000000, 0)->(637002071, -1002071)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x84394000-0x84394fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x8f194000-0x8f540fff] (3854336 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 13:23:07, date: 06/19/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 38 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9F341E136000 00081F (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9F341BC38000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9F341BC32600 000115 (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9F341BC33C00 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9F341BC2B000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9F341BC30400 000197 (v02 PmRef ApHwp 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9F341BC33000 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:591f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xdff2f000-0xdff2ffff 64bit]
pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdff10000-0xdff1ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdff2e000-0xdff2efff 64bit]
pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdff2d000-0xdff2dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdff28000-0xdff29fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdff2c000-0xdff2c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xdff2b000-0xdff2b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:a293] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a2c5] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdff24000-0xdff27fff]
pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdff20000-0xdff23fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdff00000-0xdff0ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdff2a000-0xdff2a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [1002:7300] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xdfe00000-0xdfe3ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xdfe40000-0xdfe5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [1002:aae8] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdfe60000-0xdfe63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:04:00.0: [144d:a802] type 00 class 0x010802
pci 0000:04:00.0: reg 0x10: [mem 0xdfc10000-0xdfc13fff 64bit]
pci 0000:04:00.0: reg 0x18: [io 0xc000-0xc0ff]
pci 0000:04:00.0: reg 0x30: [mem 0xdfc00000-0xdfc0ffff pref]
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1d.0: bridge window [mem 0xdfc00000-0xdfcfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x84394000-0x87ffffff]
e820: reserve RAM buffer [mem 0x8ec50000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8f194000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8fc00000-0x8fffffff]
e820: reserve RAM buffer [mem 0x46f000000-0x46fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a0f] has been reserved
system 00:00: [io 0x0a10-0x0a1f] has been reserved
system 00:00: [io 0x0a20-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x1800-0x18fe] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x0800-0x087f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:08: [io 0x1854-0x1857] has been reserved
system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xdffc0000-0xdffdffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:0a: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:0a: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:0a: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:0a: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:0a: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [io 0xff00-0xfffe] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:0c: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:0c: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 13 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1d.0: bridge window [mem 0xdfc00000-0xdfcfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xdfc00000-0xdfcfffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 41452K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x8a139000-0x8e139000] (64MB) mapped at [ffff9f304a139000-ffff9f304e138fff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c8a615336c, max_idle_ns: 440795257976 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1497878588.148:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.12.0-999-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.12.0-999-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb: port power management may be unreliable
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected]
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x906e9, pf=0x2, revision=0x48
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: ad5d7e2eec805a2c873a5ae6a9848b36fe1ca35f'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 5:628:382
rtc_cmos 00:07: setting system clock to 2017-06-19 13:23:08 UTC (1497878588)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2260K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1112K
Freeing unused kernel memory: 120K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
hidraw: raw HID events driver (C) Jiri Kosina
wmi: Mapper loaded
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
nvme nvme0: pci function 0000:04:00.0
r8169 0000:03:00.0 eth0: RTL8168h/8111h at 0xffffb8440190d000, 4c:cc:6a:cd:79:f3, XID 14100800 IRQ 124
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 0000:03:00.0 enp3s0: renamed from eth0
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (FIJI 0x1002:0x7300 0x174B:0xE329 0xCB).
amdgpu 0000:01:00.0: VM size (-1) must be a power of 2
[drm] register mmio base: 0xDFE00000
[drm] register mmio size: 262144
[drm] probing gen 2 caps for device 8086:1901 = 261ad03/e
[drm] probing mlw for device 8086:1901 = 261ad03
[drm] UVD is enabled in physical mode
[drm] VCE enabled in physical mode
nvme0n1: p1 p2
[drm] BIOS signature incorrect 0 0
amdgpu 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
ATOM BIOS: 113-1E3290U-S4A
[drm] GPU post is not needed
[drm] Changing default dispclk from 500Mhz to 600Mhz
[drm] vm size is 64 GB, block size is 13-bit
amdgpu 0000:01:00.0: VRAM: 4096M 0x0000000000000000 - 0x00000000FFFFFFFF (4096M used)
amdgpu 0000:01:00.0: GTT: 4096M 0x0000000100000000 - 0x00000001FFFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 512bits HBM
[TTM] Zone kernel: Available graphics memory: 8195414 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 1048576, num gpu pages 1048576
[drm] PCIE GART of 4096M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:01:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b100 irq 122
ata2: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b180 irq 122
ata3: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b200 irq 122
ata4: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b280 irq 122
ata5: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b300 irq 122
ata6: SATA max UDMA/133 abar m2048@0xdff2b000 port 0xdff2b380 irq 122
usb 1-10: new full-speed USB device number 2 using xhci_hcd
amdgpu: [powerplay] amdgpu: powerplay sw initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD5
[drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DP-2
[drm] HPD4
[drm] DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] DP-3
[drm] HPD3
[drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
[drm] Connector 3:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f 0x487f
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY2
amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000100000008, cpu addr 0xffff9f3412fef008
amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000100000018, cpu addr 0xffff9f3412fef018
amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000100000028, cpu addr 0xffff9f3412fef028
amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000100000038, cpu addr 0xffff9f3412fef038
amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000100000048, cpu addr 0xffff9f3412fef048
amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000100000058, cpu addr 0xffff9f3412fef058
amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000100000068, cpu addr 0xffff9f3412fef068
amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000100000078, cpu addr 0xffff9f3412fef078
amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000100000088, cpu addr 0xffff9f3412fef088
amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x0000000100000098, cpu addr 0xffff9f3412fef098
amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000001000000a8, cpu addr 0xffff9f3412fef0a8
[drm] Found UVD firmware Version: 1.87 Family ID: 12
amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x0000000000a12e90, cpu addr 0xffffb8440343fe90
[drm] Found VCE firmware Version: 52.8 Binary ID: 3
amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x00000001000000c8, cpu addr 0xffff9f3412fef0c8
amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000001000000d8, cpu addr 0xffff9f3412fef0d8
amdgpu 0000:01:00.0: fence driver on ring 14 use gpu addr 0x00000001000000e8, cpu addr 0xffff9f3412fef0e8
amdgpu: [powerplay] Can't find requested voltage id in vdd_dep_on_sclk table!
amdgpu: [powerplay] Failed to setup PCC HW register! Wrong GPIO assigned for VDDC_PCC_GPIO_PINID!
[drm] ring test on 0 succeeded in 17 usecs
[drm] ring test on 1 succeeded in 27 usecs
[drm] ring test on 2 succeeded in 34 usecs
[drm] ring test on 3 succeeded in 14 usecs
[drm] ring test on 4 succeeded in 14 usecs
[drm] ring test on 5 succeeded in 13 usecs
[drm] ring test on 6 succeeded in 15 usecs
[drm] ring test on 7 succeeded in 13 usecs
[drm] ring test on 8 succeeded in 14 usecs
[drm] ring test on 9 succeeded in 5 usecs
[drm] ring test on 10 succeeded in 6 usecs
[drm] ring test on 11 succeeded in 1 usecs
[drm] UVD initialized successfully.
usb 1-10: New USB device found, idVendor=0403, idProduct=6001
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: FT232R USB UART
usb 1-10: Manufacturer: FTDI
usb 1-10: SerialNumber: A800fq8V
[drm] ring test on 12 succeeded in 11 usecs
[drm] ring test on 13 succeeded in 1 usecs
[drm] ring test on 14 succeeded in 2 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
ata1: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: ATA-10: Crucial_CT525MX300SSD1, M0CR040, max UDMA/133
ata4.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA Crucial_CT525MX3 R040 PQ: 0 ANSI: 5
usb 2-6: new SuperSpeed USB device number 2 using xhci_hcd
ata4.00: Enabling discard_zeroes_data
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: Enabling discard_zeroes_data
ata4.00: Enabling discard_zeroes_data
sd 3:0:0:0: [sda] Attached SCSI disk
usb 2-6: New USB device found, idVendor=1b1c, idProduct=1a03
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: Voyager 3.0
usb 2-6: Manufacturer: Corsair
usb 2-6: SerialNumber: 07085CA63B1B6331
usb-storage 2-6:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-6:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
[drm] fb mappable at 0xC0D93000
[drm] vram apper at 0xC0000000
[drm] size 33177600
[drm] fb depth is 24
[drm] pitch is 15360
fbcon: amdgpudrmfb (fb0) is primary device
usb 1-11: new high-speed USB device number 3 using xhci_hcd
Console: switching to colour frame buffer device 480x135
clocksource: Switched to clocksource tsc
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.15.0 20150101 for 0000:01:00.0 on minor 0
usb 1-11: New USB device found, idVendor=1a40, idProduct=0101
usb 1-11: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-11: Product: USB 2.0 Hub
hub 1-11:1.0: USB hub found
hub 1-11:1.0: 4 ports detected
random: fast init done
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 1-12: new high-speed USB device number 4 using xhci_hcd
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Created slice System Slice.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:01: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP]
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
systemd-journald[309]: Received request to flush runtime journal from PID 1
Adding 2097148k swap on /swapfile. Priority:-1 extents:6 across:2260988k SSFS
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
lp0: using parport0 (interrupt-driven).
usb 1-12: New USB device found, idVendor=0b95, idProduct=7720
usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-12: Product: AX88x72A
usb 1-12: Manufacturer: ASIX Elec. Corp.
usb 1-12: SerialNumber: 000387
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver ftdi_sio
ftdi_sio 1-10:1.0: FTDI USB Serial Device converter detected
usb 1-10: Detected FT232RL
usb 1-10: FTDI USB Serial Device converter now attached to ttyUSB0
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
usb 1-11.4: new high-speed USB device number 5 using xhci_hcd
audit: type=1400 audit(1497878589.777:2): apparmor="STATUS" operation="profile_load" name="content-hub-clipboard" pid=765 comm="apparmor_parser"
audit: type=1400 audit(1497878589.777:3): apparmor="STATUS" operation="profile_load" name="url-dispatcher-bad-url-helper" pid=769 comm="apparmor_parser"
audit: type=1400 audit(1497878589.777:4): apparmor="STATUS" operation="profile_load" name="content-hub-peer-picker" pid=766 comm="apparmor_parser"
audit: type=1400 audit(1497878589.777:5): apparmor="STATUS" operation="profile_load" name="ubuntu-printing-app" pid=773 comm="apparmor_parser"
audit: type=1400 audit(1497878589.777:6): apparmor="STATUS" operation="profile_load" name="unity8-dash" pid=774 comm="apparmor_parser"
audit: type=1400 audit(1497878589.778:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine" pid=777 comm="apparmor_parser"
audit: type=1400 audit(1497878589.778:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=777 comm="apparmor_parser"
audit: type=1400 audit(1497878589.778:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/mediascanner-service-2.0" pid=772 comm="apparmor_parser"
audit: type=1400 audit(1497878589.779:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=768 comm="apparmor_parser"
usb 1-11.4: New USB device found, idVendor=2109, idProduct=2811
usb 1-11.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-11.4: Product: USB2.0 Hub
usb 1-11.4: Manufacturer: VIA Labs, Inc.
hub 1-11.4:1.0: USB hub found
hub 1-11.4:1.0: 4 ports detected
random: crng init done
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
asix 1-12:1.0 eth0: register 'asix' at usb-0000:00:14.0-12, ASIX AX88772 USB 2.0 Ethernet, 8c:ae:4c:f9:16:9a
usbcore: registered new interface driver asix
asix 1-12:1.0 enx8cae4cf9169a: renamed from eth0
usb 1-11.4.3: new full-speed USB device number 6 using xhci_hcd
IPv6: ADDRCONF(NETDEV_UP): enx8cae4cf9169a: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enx8cae4cf9169a: link is not ready
scsi 6:0:0:0: Direct-Access Corsair Voyager 3.0 000A PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 30965760 512-byte logical blocks: (15.9 GB/14.8 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 2b 00 00 08
sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 6:0:0:0: [sdb] Attached SCSI removable disk
usb 1-11.4.3: New USB device found, idVendor=1532, idProduct=0043
usb 1-11.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-11.4.3: Product: Razer DeathAdder Chroma
usb 1-11.4.3: Manufacturer: Razer
usb 1-11.4.4: new low-speed USB device number 7 using xhci_hcd
usb 1-11.4.4: New USB device found, idVendor=04f2, idProduct=0833
usb 1-11.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-11.4.4: Product: USB Keyboard
usb 1-11.4.4: Manufacturer: CHICONY
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.4/1-11.4.3/1-11.4.3:1.0/0003:1532:0043.0001/input/input14
hid-generic 0003:1532:0043.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-11.4.3/input0
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.4/1-11.4.3/1-11.4.3:1.1/0003:1532:0043.0002/input/input15
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
hid-generic 0003:1532:0043.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-11.4.3/input1
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.4/1-11.4.3/1-11.4.3:1.2/0003:1532:0043.0003/input/input22
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
hid-generic 0003:1532:0043.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-11.4.3/input2
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.4/1-11.4.4/1-11.4.4:1.0/0003:04F2:0833.0004/input/input23
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
hid-generic 0003:04F2:0833.0004: input,hidraw3: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-11.4.4/input0
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.4/1-11.4.4/1-11.4.4:1.1/0003:04F2:0833.0005/input/input24
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
hid-generic 0003:04F2:0833.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-11.4.4/input1
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_CHANGE): enx8cae4cf9169a: link becomes ready
asix 1-12:1.0 enx8cae4cf9169a: link up, 100Mbps, full-duplex, lpa 0xC5E1
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
systemd[1]: motd-news.timer: Adding 3min 6.746181s random time.
systemd[1]: motd-news.timer: Adding 33min 23.898957s random time.